3003 Aluminum tread checkered plate sheet is a typical Al-Mn alloy, also known as anti-rust aluminum plate. The manganese content of the 3003 pattern aluminum plate can reach 1.20%, because the 3003 pattern aluminum plate is better than the 1 series aluminum plate in terms of anti-rust performance. Because of the increase of manganese element, the hardness of 3003 patterned aluminum plate alloy is high, it is well applied in mechanics, has good formability, very good corrosion resistance and weldability. H14 designates the temper, and means that 3003 has been strain hardened and partially annealed. In this condition, 3003 can be easily formed. Embossing or debossing 3003 in this temper should not strain or crack the aluminum. 3003 Aluminum tread checkered plate sheet- often referred to as diamond plate, the diamond trend pattern is slip-resistant and cosmetically appealing. The 3003 patterned aluminum plate has a patterned aluminum plate with one rib, two ribs, three ribs, and five ribs.
|Temper||O, H12, H14, H16, H18, H22, H24, H26,|
|H32, H34, H36, H38, H111, H112, H114, H224, T4, T6|
|Surface||Bright finish, Mill finish|
|Bar difference||1 bar (Diamond/Pointer), 2 bar, 3 bar, big/small 5 bar|
|Weight||about 2.5 tons per pallet|
|Mill finish Surface||Bright finish Surface|
|Pattern height||Sheet Thickness from 1.0mm to 2.0mm, bar height: 0.50mm||Sheet Thickness from 1.0mm to 2.0mm, bar height: 0.50mm|
|Sheet Thickness from 1.0mm to 2.0mm, bar height: 1.00mm||Sheet Thickness from 1.0mm to 2.0mm, bar height: 1.00mm|
|Sheet Thickness above 2.0mm, bar height: 1.50mm||Sheet Thickness above 2.0mm, bar height: 1.50mm|
|Width (mm)||Maximum 1500mm||Maximum 1650mm|
|Length (mm)||max 6000mm for sheet or as require d for coil||max 6000mm for sheet or as required for coil|
|Paper interleaves||On request for selected||On request for selected|
|Normal size||1200×2400mm, 1219×2438mm, 1219×3048mm||1200×2400mm, 1219×2438mm, 1219×3048mm|
3003 Aluminum tread checkered plate sheet has good anti-slip and anti-rust properties. Therefore, it is often used in loading ramps, trench covers, dock floors, stair treads, car/truck/ambulance and fire engine floors, etc.
3003 Aluminum tread checkered plate sheet has a good surface quality and can be used as decorative wall panels, cabinets, ceilings, etc.
3003 Aluminum tread checkered plate sheet has good corrosion resistance and can be used in the chemical industry, or for decoration of ships and port facilities.
3003 Aluminum tread checkered plate sheet is also used in humid environments such as refrigerators and air-conditioning ventilation ducts.
1100 aluminum tread checkered plate sheet belongs to industrial pure aluminum, and the aluminum content reaches more than 99.00%. Both the 1100 and the 1060 aluminum tread checkered plate sheet cannot be thermally treated, but they have extremely high corrosion resistance, and the electrical conductivity and thermal conductivity are relatively good.
The main alloying element of 5754 aluminum tread checkered plate sheet is magnesium, and the magnesium content is between 3% and 5%. It can be used in occasions with high strength and high corrosion resistance. 5754 aluminum tread checkered plate sheet has excellent corrosion resistance, especially for seawater and industrially polluted atmospheres. Its strength is higher than 5251.
6061 aluminum tread checkered plate sheet has the advantages of novel shape, long service life and good anti-slip effect. It is mainly used in anti-slip flooring, decoration and other fields such as construction, vehicles and ships. Our company can produce pointer pattern plate, one rib pattern plate,