The difference between 3003 aluminum plate and 5052 aluminum plate

Introduction of the difference between 3003 aluminum plate and 5052 aluminum plate 3003 aluminum plate and 5052 aluminum plate are two kinds of alloy aluminum plates commonly used in the market, and they are also two common aluminum plate products of Henan Flait Aluminum Co., Ltd. The thickness of 3003 aluminum plate produced by our company is 0.2-4.5mm, which is mostly used for power battery shells, mobile phone shells, etc.; the thickness of 5052 aluminum plate is 0.15-600mm, which is often used in GIS high-voltage switches, marine sheet metal and other places. The following takes 3003H24 aluminum plate and 5052H24 aluminum plate as examples to introduce the differences between these two aluminum plates.Click to Order Chemical composition of 3003 aluminum plate and 5052 aluminum plate Alloy Si Fe Cu Zn Mn Mg Cr Al 3003 0.60 0.70 0.05-0.20 0.10 1.0-1.5 – – Remainder 5052 ≤0.25 ≤0.40 ≤0.10 ≤0.10 ≤0.10 2.2-2.8 0.15-0.35 Remainder In terms of chemical composition, 3003h24 aluminum plate is an aluminum-manganese alloy. Due to the increase in manganese content, 3003 aluminum plate has excellent corrosion resistance and processability. The 5052h24 aluminum plate is an aluminum-magnesium alloy. Due to the increase in magnesium content, the 5052 aluminum plate has higher strength...

Get A Quote

3003 H24 aluminum plate for building curtain walls

Aluminum curtain wall is a new type of curtain wall material that uses high-quality aluminum alloy plate as the base material, and is formed by numerical control bending technology, and the surface is sprayed with decorative paint. The base material of the aluminum plate is usually a single-layer aluminum alloy plate dedicated to curtain walls such as 1100-H24, 1060-H24, 3003-H24, and 5005-H24. Among them, 3003-H24 has the characteristics of good corrosion resistance, good welding performance and good plasticity (close to super aluminum alloy), and is widely used in the exterior decoration of airports, stations, hospitals, conference halls, opera houses, stadiums and other buildings.Click to Order Specification of 3003 H24 aluminum plate for building curtain walls Alloy 3003 H24 aluminum plate Temper H24 Thickness (mm) 1.5-3.0 Width(mm) 20-2000 Length (mm) 500-16000 Application Various interior and exterior walls of buildings, lobby facades, column decorations, elevated corridors, pedestrian bridges, elevator wrapping, balcony packaging, advertising signs, indoor special-shaped ceilings, etc.   Chemical Composition of 3003 H24 aluminum plate for building curtain walls Alloy Si Fe Cu Zn Mn Al 3003 0.60 0.70 0.05-0.20 0.10 1.0-1.5 Remainder   Mechanical Properties of 3003 H24 aluminum plate for building curtain walls Alloy Temper Thickness (mm) Mechanical properties Tensile Strength（Mpa） Yield strength...

Get A Quote

Aluminum insulation coil roll with Kraft paper

Aluminum insulation coil with Kraft paper refers to a specific type of thermal insulation material used in various applications, particularly in the HVAC (Heating, Ventilation, and Air Conditioning) industry. It consists of an aluminum coil or strip with a layer of Kraft paper adhered to one side. The combination of the aluminum coil and Kraft paper creates an insulation material that offers both thermal conductivity and moisture protection. The insulation helps prevent heat loss or gain, enhances energy efficiency, and provides temperature control.Click to Order Components and properties Aluminum Coil: The aluminum coil is typically made from an aluminum alloy, such as 1060 or 3003. These alloys are commonly chosen for their thermal conductivity, corrosion resistance, and formability. The aluminum coil acts as the primary thermal conductor, facilitating the transfer of heat or cold in the application. Kraft Paper: Kraft paper is a strong and coarse paper made from wood pulp. It is commonly used as a protective barrier or lining material. In the context of an aluminum insulation coil, the Kraft paper is applied to one side of the aluminum strip. The Kraft paper serves multiple purposes: Moisture Barrier: Kraft paper helps prevent moisture from penetrating the insulation, protecting...

Get A Quote

Why use 5052 Aluminum sheet for fuel tank？

5052 aluminum sheet is widely utilized in various fuel tank applications, including automotive, marine, and aviation industries. Its corrosion resistance, strength, weldability, formability, and lightweight properties make it a suitable choice for manufacturers looking to construct durable and efficient fuel tanks.Click to Order 5052 aluminum sheet is commonly used for fuel tanks due to several reasons Corrosion Resistance: 5052 aluminum sheet offers excellent resistance to corrosion, including resistance to rust and corrosion caused by fuel and other chemicals. This is particularly important for fuel tanks, as they come into contact with corrosive substances such as gasoline, diesel, and other fuels. The corrosion resistance of 5052 aluminum helps ensure the durability and longevity of the fuel tank. Strength and Durability: 5052 aluminum sheet has good strength and durability properties. It has a high tensile strength and is resistant to deformation, making it suitable for fuel tank applications where structural integrity is crucial. The strength of 5052 aluminum allows the tank to withstand various loads, impacts, and vibrations that can occur during transportation or use. Lightweight: Aluminum, including 5052 alloy, is lightweight compared to many other metals. This lightweight property is advantageous for fuel tanks as it helps reduce the overall weight...

Get A Quote

8006 HO hydrophilic aluminum foil for heat exchanger

8006 hydrophilic aluminum foil is a specific type of aluminum foil that is primarily used in heat exchangers. 8006 aluminum foil is coated with a hydrophilic layer on its surface. This coating alters the surface properties of the foil, making it highly water-attracting or hydrophilic. This hydrophilic coating helps in promoting the formation of a thin and continuous water film on the surface of the foil, which improves heat transfer efficiency in the heat exchanger.Click to Order Specification of 8006 HO hydrophilic aluminum foil for heat exchanger Alloy Temper(mm) Thickness(mm) Width(mm) CoreDiameter(mm) Color Sleeve Material 1100 3102 8011 8006 O/HO,H22,H24,H26,H18 0.08-0.20 100-1400 ￠75,￠150, ￠200,￠300, ￠505 blue, gold, green, rose red, etc. Paper tube, aluminum   Alloy Temper Tensile Strength Elongation(%) Cupping Test Value 1100 3102 8011 8006 O/HO 80~110 ≥27 ≥6.0 H22 100~135 ≥22 ≥5.5 H24 115 ~145 ≥20 ≥5.0 H26 125 ~ 160 ≥10 ≥4.5 H18 ≥160 ≥1 —   Advantages of 8006 HO hydrophilic aluminum foil for heat exchanger Enhanced Heat Transfer Efficiency: The hydrophilic coating on 8006 aluminum foil helps in improving heat transfer efficiency by facilitating better contact between the liquid refrigerant or condensate and the foil surface. Corrosion Resistance: 8006 aluminum foil and the hydrophilic coating provide...

Get A Quote

3105 Aluminum sheet for cap closure, bottle cap, screw caps

The 3105 aluminum sheet is a commonly used material for cap closures in various industries. 3105 aluminum sheet is a non-heat treatable alloy from the 3xxx series of aluminum alloys, has excellent corrosion resistance and formability. 3105 aluminum sheets are applied to bottle cap making of various products, such as wine ropp caps, cosmetic pp caps, pharmaceutical closures, beverage covers and so on.

Get A Quote

5086 H116 aluminum plate for ship

5086 H116 marine aluminum plate is capable of withstanding greater stresses and loads. In seawater and other corrosive media. It can effectively resist corrosion from salt spray, humid environment and chemical substances, extending the service life of the ship.Click to Order 5086 H116 marine aluminum plates can be connected and assembled through various welding methods to facilitate manufacturing and repair projects. It can also help reduce the ship’s dead weight and improve fuel efficiency and load capacity. It is also easy to cut, shape and process, making it suitable for manufacturing a variety of marine components and structures.     Features of 5086 H116 Aluminum Plate for Ship High Strength: 5086 H116 aluminum sheet offers exceptional strength, making it suitable for load-bearing applications in boat construction. Excellent Corrosion Resistance: The aluminum-magnesium alloy composition provides excellent resistance to corrosion, particularly in saltwater marine environments. Weldability: It exhibits good weldability, allowing for ease of fabrication and joining different components. Lightweight: Despite its high strength, 5086 H116 aluminum sheet retains a relatively low density, contributing to lightweight boat construction and improved fuel efficiency. Specification of 5086 H116 Aluminum Plate for Ship Alloy 5086 Temper O,H111,H112,H116,H321 Thickness (mm) 1.50-120 Width (mm) ≤3100 Length (mm) 1000-16000...

Get A Quote

5083 H114 H34 aluminum sheet for ship

5083 H114 H34 aluminum sheet for ship can withstand large stress and load and is suitable for hull structures requiring high strength. It can also resist corrosion from corrosive media such as sea water and moisture, extending the service life of the ship. 5083 H114 marine aluminum plate can also reduce ship weight and improve load carrying capacity and fuel efficiency.Click to Order 5083 H114 H34 aluminum sheet for ship can be processed into various shapes through cold forming, which is suitable for ship parts that require complex shapes. It has good corrosion resistance and can still maintain its performance and appearance under harsh environmental conditions. It has a lower density compared to other materials, which can reduce the weight of the ship and improve fuel efficiency and load capacity.     Features of 5083 H114 H34 Aluminum Sheet for Ship High Strength: 5083 H114 H34 aluminum sheet offers excellent strength and hardness, providing structural integrity and durability for boat construction. Outstanding Corrosion Resistance: The aluminum-magnesium alloy composition gives it exceptional resistance to corrosion, making it suitable for marine environments with high exposure to seawater. Weldability: It exhibits good weldability, allowing for ease of fabrication and joining different components. Lightweight: Despite...

Get A Quote

5083 h112 aluminum sheet for ships

5083 h112 marine grade aluminum plate has high strength and low ductility fracture properties and is highly corrosion resistant. The corrosion rate in seawater is very slow, and the average corrosion rate is generally 0.025-0.05mm/year. 5083 h112 aluminum sheet for ships is suitable for hull structural materials. It can resist the corrosion of the hull by sea water and marine atmosphere, reducing maintenance costs such as oiling. It is an ideal low-ductility fracture structural material and is of great significance to the safety and life of ships. Flait Aluminum has conducted a lot of research and made great progress in production quality. The 5083 marine grade aluminum plates produced have more stable quality and better performance. Due to the excellent product quality, our company has passed DNV, ABS, BV, and CCS ship class certifications. The product’s mechanical properties, welding performance and corrosion resistance all meet ship standards.Click to Order     Features of 5083 h112 Aluminum Sheet for Ships High Strength: 5083 H112 aluminum sheet offers higher strength compared to the soft state, making it suitable for load-bearing applications in boat construction. Excellent Corrosion Resistance: The aluminum-magnesium alloy composition provides exceptional resistance to corrosion, particularly in marine environments. Weldability: It exhibits...

Get A Quote

5083 O aluminum sheet for ships

5083 O Aluminum sheet for ships has excellent corrosion resistance to seawater. This allows it to maintain its performance and appearance for long periods of time when used in ships and marine environments, extending the life of the ship. In ship design, the lower density of 5083 O aluminum sheets for ships can reduce the overall weight, improve the ship’s fuel efficiency, reduce operating costs, and increase the ship’s load-carrying capacity and stability.Click to Order 5083 O Aluminum sheet for marine use can be easily cut, formed, drilled and stamped. This makes operation and construction easier during ship building and repair.     Features of 5083 O Aluminum Sheet for Ships Excellent Corrosion Resistance: 5083 O aluminum sheet has outstanding resistance to seawater and industrial chemicals, ideal applications. High Strength: Despite being in the soft state, 5083 O aluminum sheet still exhibits relatively high strength, ensuring structural integrity for boat construction. Weldability: This aluminum alloy is highly weldable, allowing for easy fabrication and joining different. Lightweight: 5083 O aluminum sheet has a low density, contributing to lightweight boat construction, which can improve fuel efficiency and increase payload capacity.   Specification of 5083 O Aluminum Sheet for Ships Alloy 5083 Temper O,H111,H112,H116,H24,H32,H321 Thickness...

Get A Quote