- Email: sales@flait-aluminum.com
- Tel: 0086-13203837398
Home > News & Blog > News > 1060 3003 anodized aluminum stucco embossed sheet coil for refrigerator
Stucco embossed aluminum sheet coil is a rolled product with a special pattern on the surface. The pattern on the surface of the aluminum coil increases the contact area with the air, resulting in higher thermal conductivity and heat dissipation performance. It is especially suitable for use in refrigerators, air conditioners and refrigeration equipment. 1060 and 3003 aluminum alloys are commonly used in our stucco embossed aluminum sheets/rolls. The stucco embossed aluminum sheet coil supplied by Flait have a thickness of 0.25mm-2.0mm and a maximum width of 1500mm. The thickness can be increased by 0.08-0.25mm after embossing. In addition, we also provide processing services for anodized aluminum coils, which can further enhance the anti-corrosion capabilities of the panels.Click to Order
Anodized aluminum stucco embossed sheet coil is particularly suitable for the refrigeration industry and is mainly used for the liner of refrigerators or freezers. The inner panel of the refrigerator uses 1060 3003 anodized aluminum stucco embossed sheet coil. The pattern is usually orange peel. The aluminum plate is anodized to form an aluminum oxide film on the surface, which improves the surface hardness and has stronger wear resistance and corrosion resistance . Not only is it waterproof, anti-fouling, wear-resistant, and corrosion-resistant, it is also very easy to clean and convenient for people’s daily use.
1060 anodized aluminum stucco embossed sheet coil is known for its good corrosion resistance, high ductility and high reflective finish. The anti-rust effect of 1060 aluminum is not as good as that of 3000 series aluminum alloy, but its price is lower than that of 3000 series aluminum alloy. Suitable for cladding insulation of refrigerators.
3003 anodized aluminum stucco embossed sheet coil is a common rust-proof aluminum sheet coil. Compared with 1000 series aluminum alloy, it is more corrosion-resistant and has better rust-proof and moisture-proof effect. It is more suitable for use in humid environments and is often used as the lining of refrigerators and freezers.
| Alloy | Si | Fe | Cu | Mn | Mg | Zn | Ti | Others | Al: Min. | |
| Each | Total | |||||||||
| 1060 | 0.25 | 0.35 | 0.05 | 0.03 | 0.03 | 0.05 | 0.03 | 0.03 | – | 99.6 |
| 3003 | 0.6 | 0.7 | 0.05-0.20 | 1.0-1.5 | – | 0.1 | – | 0.05 | 0.15 | Remainder |
| Alloy | 1060,3003 |
| Temper | O, H12, H14, H22, H24 |
| Thickness(mm) | 0.2-2.0 |
| Width(mm) | 100-1500 |
| Length(mm) | As per customer’s requirements |
| Inner Diameter(mm) | 150mm, 300mm, 500mm |
| Surface Treatment | Mill Finish,bright finish,anodized,color coated |
| Embossing Depth | 0.08-0.25 |
| Pattern | Rhombic veins, orange peel veins, diamond veins, five-rib veins etc. |
| Standard | GB/T 3880, EN14286, EN485, ASTM B209, or according to customer’s special requirements. |
Strong corrosion resistanceGood surface qualityEasy to cleanLight weightRecyclabilityOriginal Source:https://www.flait-aluminum.com/Stucco-Embossed-Aluminum-Coil-2.html
English
Español