High-performance aluminum alloy cover parts supplier | Automobile lightweight aluminum plate customization expert

Flait Aluminum is the world’s leading supplier of high-performance aluminum alloy cover parts. We focus on providing 6 series/5 series customized aluminum plates (6016-T4, 6061-T6, 6082-T6) for leading automakers such as Tesla, BMW, and BYD. With 35% body weight reduction efficiency and IATF 16949 certified quality, we help achieve breakthroughs in endurance and cost optimization in the new energy era! ‌ Flait automotive aluminum sheet‌ core products‌ 6 series aluminum alloy exterior covering parts 6016-T4 aluminum sheet‌: dedicated to doors/hoods, yield strength ≥220MPa, stamping pass rate 99.2%. ‌6111-T4 aluminum sheet‌: the first choice for high-end models, dent resistance increased by 30%, suitable for laser welding process. ‌6082-T6 aluminum sheet‌: roof longitudinal beam/anti-collision beam, tensile strength ≥310MPa, collision energy absorption efficiency increased by 40%. New energy exclusive aluminum material‌ ‌6061-T6 aluminum sheet for electric Battery tray: resistant to electrolyte corrosion, passed 500,000 vibration tests, zero leakage. 5182-O aluminum plate for door inner panel: elongation ≥ 25%, suitable for deep stamping complex structure, 18% cost reduction. 6005A-T6 aluminum plate for automobile chassis parts: tensile strength ≥ 270MPa, 50% lighter than traditional steel parts. Environmentally friendly and recyclable solution RC-6016 recycled aluminum plate: 60% carbon footprint reduction, performance benchmarked against virgin aluminum, Volvo...

Get A Quote

Advantages and disadvantages between aluminum wire and copper wire

The difference between copper wire and aluminum wire 1. Color difference: The color of copper wire is dark purple, and the color of aluminum wire is grayish white. 2. Difference in resistance: The resistance of copper wire is smaller than that of aluminum, and the conductivity of copper wire is better. 3. Difference in density: The density of copper wire is higher than that of aluminum wire, and copper wire is heavier.   Advantages of copper wire? ✅Copper wire has low resistance, and the resistance of copper wire cable is about 1.68 times lower than that of aluminum wire cable, so the conductivity and heat transfer of copper wire are better than aluminum wire, and the power loss is also relatively low. ✅Copper wire has good ductility: The elongation of copper alloy is 20-40%, the elongation of electrical copper exceeds 30%, and the elongation of aluminum alloy is only 18%. ✅Anti-fatigue: Aluminum is easy to break after repeated bending, and copper is not easy to fold. In terms of elasticity index, copper wire is also about 1.7-1.8 times higher than aluminum wire. ✅Stable performance, corrosion resistance: Copper wire is resistant to oxidation, corrosion and has a long service life, while...

Get A Quote

High conductive 1060 aluminum tape for cables

Cable refers to a special cable with conductor material as the core, covered with insulating material, and produced with a high laying coefficient and specific functional requirements. In addition to the functions of conducting current and transmitting signals, cables can also have heat dissipation, strength, durability, fire resistance, chemical corrosion resistance, and anti-hooking properties. 1060 Aluminum tape is an important link in cable production. It has excellent durability and reliability, can reduce the deformation and aging of wires, and extend the service life of wires. 1060 cable aluminum tape is a high-purity aluminum alloy with an aluminum content of 99.6%. It has the characteristics of high tensile strength, low density, good plasticity, corrosion resistance, wear resistance, and impact resistance. Mechanical properties of high conductive 1060 aluminum tape for cables ✅1. 1060-O tensile strength σb (MPa): 70 ✅2. Elongation δ (%): 30 ✅3. Resistivity: 0.028 Applications of high conductive 1060 aluminum tape for cables 1. Transformer aluminum strip (transformer aluminum foil); 2. Aluminum tape for high-frequency welding hollow aluminum strip; 3. Aluminum strip for fin stock; 4. Aluminum tape for cable; 5. Aluminum strip for stamping; 6. Stamping aluminum strip and aluminum edge strip. Advantages of high conductive 1060 aluminum tape...

Get A Quote

Aluminum sheet for laser engraving

In the field of precision manufacturing, laser engraving has strict requirements on the thermal conductivity, surface adaptability and processing economy of materials. Aluminum sheet has become the preferred material in the industry due to its efficient energy absorption, compatibility with multiple processes and light weight and high strength. Which aluminum sheets are suitable for laser engraving? What are the characteristics of each aluminum sheet? What are their respective application areas? This article will lead you to explore the full brand analysis and application guide of aluminum sheets for laser engraving. Classification of aluminum sheets for laser engraving 1 series aluminum sheet: 1060 aluminum sheet, 1100 aluminum sheet 1060/1100 aluminum sheet is a low-cost and high-precision choice, with a purity of ≥99%, a thermal conductivity of 237W/(m·K) and a hardness of HV60-80. It has excellent ductility, and the surface roughness after oxidation is ≤0.8μm; the processing speed is the fastest (2000mm/s) and the material cost is low. It is suitable for electronic signs, crafts, and interior decorative panels. ‌ 3 series aluminum sheet: 3003 aluminum sheet, 3004 aluminum sheet 3003/3004 aluminum sheet is a model of balanced performance, containing 1.0-1.5% manganese, 30% higher strength than 1 series, and thermal conductivity of...

Get A Quote

5052 anodized aluminum plate VS 1060 anodized aluminum plate

Commonly used anodized aluminum plates/coils include: 1060 anodized aluminum plates, 1070 anodized aluminum plates, 5052 anodized aluminum plates, 6061 anodized aluminum plates, 5754 anodized aluminum plates, 5083 anodized aluminum plates, 7075 anodized aluminum plates, etc. Flait Aluminum can provide aluminum plates of different colors, paper interlayers or laminations to protect the surface of the aluminum plates, and can be customized to meet the different needs of different customers. 5052 anodized aluminum plates/coils 5052 anodized aluminum plates can be divided into ordinary anodizing and hard anodizing. The color film obtained by electrolytic oxidation coloring of aluminum and aluminum alloys has good wear resistance, sun resistance, heat resistance and corrosion resistance, and is widely used in the decoration and corrosion protection of modern architectural aluminum profiles. The 5052 anodized film has a high porosity and adsorption capacity, and is easily eroded by pollution and corrosive media. It must be sealed to improve corrosion resistance, anti-pollution ability and fix pigments. Advantages of 5052 anodized aluminum plates/coils ✅1. High hardness and good corrosion resistance In the experiment, the 5052 anodized aluminum plate is placed in the corresponding electrolyte (such as sulfuric acid, chromic acid, oxalic acid, etc.) as an anode, and electrolysis is carried...

Get A Quote

Top 5 Reasons Global Shipbuilders Choose 5052 Aluminum Coil

For decades, global shipbuilders have faced a critical dilemma: balancing corrosion resistance, structural strength, and cost-effectiveness in harsh marine environments. Now there is an answer to this question: 5052 aluminum coil. 5052 aluminum alloy is a marine-grade alloy that is redefining modern shipbuilding. Learn why leading naval architects and OEMs trust 5052 aluminum coil for everything from cargo ships to offshore platforms. Reasons to choose 5052 aluminum coil for shipbuilding 1.Superior resistance to saltwater corrosion  Problem:‌ Steel rusts. Stainless steel is heavy. Ordinary aluminum fails in chlorine-rich environments. ‌Solution:‌ 5052 aluminum’s ‌2.2%-2.8% magnesium content‌ forms a self-healing oxide layer, resisting pitting and crevice corrosion.     ●‌Proven Performance:‌ 3,000+ hours salt spray test (ASTM B117), ‌3x longer lifespan‌ vs. 3003 aluminum.     ●‌Real-World Impact:‌ The use of 5052-H34 aluminum plate can greatly reduce the cost of hull maintenance. ‌ 2. Strength-to-Weight Ratio That Beats Steel‌ ‌Problem:‌ Heavy steel increases fuel consumption; weak alloys risk structural failure. ‌Solution:‌ 5052 aluminum delivers ‌210-270 MPa tensile strength‌ at just ‌2.7 g/cm³ density‌—‌50% lighter than steel‌ with comparable load-bearing capacity.     ●‌Case Study:‌ 5052-H32 aluminum coil is used for bulkheads of LNG carriers, which can save about 20% fuel while meeting IMO...

Get A Quote

8006 vs 8011 aluminum foil for wrinkle-free lunch boxes

In the catering packaging industry, aluminum foil wrinkle-free lunch boxes have become an environmentally friendly benchmark for replacing plastics, but how to choose the right aluminum foil material? ‌8006 aluminum foil‌ and ‌8011 aluminum foil‌ have become the two mainstream choices in the market due to their unique properties. This article compares core parameters to help you accurately match your needs and create highly competitive products! ‌Performance comparison of 8006 vs 8011 aluminum foil‌ ‌Performance ‌ ‌8006 aluminum foil‌‌ ‌8011 aluminum foil‌‌ ‌Thickness‌ 0.06-0.2mm(customized stamping) 0.05-0.2mm(ultra-thin and lightweight) ‌Tensile strength‌ ≥150 MPa(O temper) ≥120 MPa(H18 temper) ‌Elongation‌ ‌ ≥3% ≥15% ‌Surface finish‌ Ra≤0.3μm Ra≤0.2μm ‌Applicable‌ Compression resistance, high temperature freshness loc Flexible sealing, complex mold forming   ‌How to choose 8006 vs 8011 aluminum foil‌ ‌1. 8006 aluminum foil: high strength and compression resistance, specially designed for “high temperature freshness lock”‌ ◆ ‌Tensile strength 150MPa+‌: Far exceeding ordinary aluminum foil (80-100MPa), one-piece stamping and wrinkle-free structure, can resist extrusion deformation even when stacked for transportation. ◆ ‌Temperature resistance 250℃‌: Suitable for microwave heating, oven baking, steam sterilization, perfectly locks the original flavor of soup and ingredients. ◆ ‌Applicable scenarios‌: high-temperature sterilization packaging of pre-prepared dishes, soup/hot pot takeaway boxes, airline meal hot food containers...

Get A Quote

Aluminum plate or steel plate for lithium battery casing, which one is better?

Under the dual demands of lightweight and safety of power batteries, aluminum plates have become the mainstream choice for new energy vehicles with their low density and high heat dissipation characteristics, while steel plates stick to the industrial field with their impact resistance and low cost. Faced with the multi-dimensional game of energy density, cost, and corrosion resistance, how should enterprises choose? 1. Material and structural characteristics ‌ Aluminum plate‌ ‌✅Aluminum alloy grades‌: The mainstream uses ‌3003‌ (Al-Mn series), ‌3004‌ (Al-Mn-Mg series) and ‌6061‌ (Al-Mg-Si series) aluminum alloys, among which: ‌◆ 3003 aluminum plate‌: manganese content 1.0%~1.5%, excellent corrosion resistance, good formability, suitable for square battery shell stamping process‌. ‌◆ 3004 aluminum plate‌: magnesium element (0.8%~1.3%) is added, the strength is increased by 20% compared with 3003, taking into account lightweight and anti-deformation ability, and is mostly used in high energy density batteries‌. ◆ ‌6061 aluminum plate‌: Contains magnesium (0.8%~1.2%) and silicon (0.4%~0.8%), with a strength close to 60% of steel plate, but a density of only 1/3 of steel, and is used for high-end power battery components‌. ✅‌Processing characteristics‌: Aluminum plate is formed by cold rolling or stamping process, and the surface can be anodized (such as 3003 aluminum...

Get A Quote

Copper enameled wire vs aluminum enameled wire

In the fields of electronics, electrical and industrial manufacturing, enameled wire is a key material for winding coils, transformers, motors and other equipment. As two mainstream choices, what is the difference between copper enameled wire and aluminum enameled wire? How to choose a more suitable material according to needs? This article provides you with an in-depth analysis from the dimensions of conductivity, cost, durability, etc. The difference between copper enameled wire and aluminum enameled wire ‌✅1. Conductive performance: copper wire is more efficient The conductivity of copper (about 58.5 MS/m) is significantly higher than that of aluminum (about 36.9 MS/m), which means that under the same cross-sectional area, copper enameled wire can pass a larger current and generate less heat, which is especially suitable for high-frequency and high-voltage scenarios (such as precision electronic components, high-frequency transformers). However, due to its weak conductivity, aluminum wire needs to increase the wire diameter or adopt a special structural design to achieve the same current carrying capacity, which may affect the miniaturization layout of the equipment. ✅‌2. Mechanical strength: Copper has better ductility Copper is soft and has excellent ductility. It is not easy to break during winding, welding and processing, and can adapt...

Get A Quote

High-purity 1100 cold-rolled aluminum coil supplier

Today, with the surge in demand for precision processing and lightweighting, 1100 cold-rolled aluminum coil has become an ideal choice for electronic components, packaging materials, architectural decoration and other fields with its ultra-high purity, excellent formability and stable surface quality. As a global leader in aluminum solutions, Flait Aluminum relies on advanced cold rolling technology and strict quality control system to provide the industry with full-specification 1100 cold-rolled aluminum coils with a thickness of 0.1-6.0mm and a width of 20-2000mm, helping customers achieve cost reduction, efficiency improvement and product upgrades. Why choose Flait Aluminum 1100 cold-rolled aluminum coil? ‌ ‌ Purity of more than 99% ‌: 1100 alloy contains ≥99.0% aluminum and has extremely low impurities, ensuring stable conductivity, corrosion resistance and processing performance. ‌ Advantages of cold rolling process‌: 1100 aluminum coil‌ undergoes multiple cold rolling and precision annealing treatments, with a surface finish of Ra≤0.4μm and a thickness tolerance of ±0.02mm, meeting the needs of high-precision stamping and stretching. ‌ Wide application scenarios‌: From electronic shielding covers to food packaging, from building curtain walls to kitchen utensils, it is suitable for diversified processing needs. ‌ Environmentally friendly and recyclable‌: 100% recyclable aluminum, in line with RoHS and REACH...

Get A Quote